SP104E 17Key RF Controller for Addressable Digital Magic RGB LED Strip

SP104E 17Key RF Controller for Addressable Digital Magic RGB LED Strip

---

Introduction

For addressable or digital led strip, controller is a must to change the lighting modes. There's many different controller for magic led strip, including 3key Mini Controller, IR Controller, RF Controller, RF Music Controller, Bluetooth Controller, WiFi Controller, Bluetooth Music Controller, and other Addressable Controller.

Product Features

• Long distance RF remote control
  

• Support almost every kind of one-wire LED driver IC
  

• With 300kinds of led strip lighting effects
  

• Each controller can control up to 2048 pixels

• DC5V~24V wide range working voltage, reverse power supply input protection

• Support IC SM16703 UCS1903 WS2811 WS2812 WS2813 WS2818 SK6812 GS8206 P943S P9411

Remote Controller

Testing

Continuously pressing the AUTO button 5 times until led strip is off, release the AUTO button to into the mode of switch in red, green, blue, yellow, purple, cyan and white.

Matching

Constinuously pressing the MATCH button 5 times and led strip will flash in white quickly to match the remote control with the receiving controller. Press the MATCH button for 5 times till led strip flash in white slowly to un-match.

Reorder RGB

Different from kinds of led strip light,  the R G B keys may don't perfectly match to your controller, recorder them if needed. Constinuously pressing the SETTING button 5 times until led flash in white once and then turn into all white, pressing the R button until led is red, pressing the G button until led is green, pressing the B button till led is blue, then press SETTING button to confirm your setting.

Adjustable Number of Pixels

The factory default setting of the number of controlled pixel is 600. Continuously pressing the SETTING button 5 times until led strip flash once and turn all white, pressing MODE+ to add pixels, pressing MODE- to decrease pixels, (each pressing add or decrease 60 pixels) then press the SETTING button to confirm your setting; Can be regulated to up to 2048 pixels, the minimum number is 300 pixels.

Catching

When in the AUTO mode, pressing the SETTING button once, and then press MATCH button once to catch the current mode to stay and operate circularly

LED Controller for Addressable Digital Magic Progammable LED Strip Light

---