SP108E WiFi LED Controller for Addressable Digital Dream Color RGB LED Strip Light

SP108E WiFi LED Controller for Addressable Digital Dream Color RGB LED Strip Light

---

Introduction

For addressable or digital led strip, controller is a must to change the lighting modes. There's many different controller for magic led strip, including 3key Mini Controller, IR Controller, RF Controller, RF Music Controller, Bluetooth Controller, WiFi Controller, Bluetooth Music Controller, and other Addressable Controller.

Product Features

• Long distance APP remote control via WiFi

• Support routing mode (AP) and LAN connection mode (STA)
  

• Support almost every kind of one-wire or two-wires LED driver IC
  

• Support setting pixel number and segment number, support up to 2048 pixels
  

• With 180 kinds of led strip effects and 8 kinds of color adjustable lighting modes

• Creatively using from-imag-to-effect method for user to DIY any lighting effect

• DC5V~24V wide range working voltage, reverse power supply input protection

• Support IC SM16703 UCS1903 WS2811 WS2812 WS2801 WS2813 WS2818 SK6812 SK6812RGBW TM1804 TM1914 TM1814 TM1913 LPD6803 LPD8806 SK9822 GS8206 GS8208 TX1812 TX1813 INK1003 APA102 APA105  P9813 P943S P9411 P9413 P9414 P9412

Specification

Working temperature: -20℃~60℃

Working Voltage: DC5V~24V

Working Current: 20mA~130mA

Remote distance: 30 Meters

Product size: 85mm*45mm*22mm

Product weight: 40g 

Certificates: CE, RoHS

Instruction

Requires IOS version 10.0 or later; Requires Android OS version 4.4 or later.

Search "LED Shop" in App Store or Google Play or scan below QR code to download and install APP.

AP(Access Point) mode: Controller and Phone connect directly, controller works as an access point. 

Connect steps: 

1.When the device is not connected to any WIFI network, power on the controller and wait for 20s 

and then controller will switch into AP mode ;

2.In the WIFI setting page,find and connect the controller(named like SP108E_xxx, the default pin code is 12345678),

3.Open the LED Shop App ,then the controller will be showed on the device list;

STA(Station) mode: Controller and phone are in one same WIFI network, in this network, users can operate the controller smoothly.

Connect steps: 

1.When the device is not connected to any WIFI network,power on the controller,

controller will be remain in Wait-For-Connet mode for 20 seconds;

2.Make sure that your phone is connected to a WIFI network, Open LED Shop APP, pressing the Add Device button, 

input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish;

3.When controller successfully enter the WIFI network, it will be showed on the device list;

4.User can select the controller and remove it out of the network by pressing the Remove Device button,

then the controller will switch into AP mode.

LED Controller for Addressable Digital Magic Progammable LED Strip Light

---